Tag: engineering

RECORD Setting 162kph Autonomous Run at Goodwood FOS | Roborace

So we’re about to see DevBot 2.0 – in fact we are seeing DevBot 2.0 out on the circuit. I’m joined by Victoria Tomlinson. Victoria tell us. So Jack, this is DevBot 2.0. So those of you who attended last year will have seen Robocar, our fully autonomous race car take to the hill for […]

We Develop a Bike Frame / E2 // TECH SPECS

Cheers, here we are again, nice you are watching. If you saw the KICK OFF Video You´ll know we talked a lot about Kinematics, as that`s the subject we care about most. But today we would like to introduce you to the specs that we want to build the frame around. Let us introduce you […]

Amphibious Houseboat Hits The Road | RIDICULOUS RIDES

THEON PARSEGHIAN: Sure enough 500 people show up for this thing and I am there with a boat that may or may not float. So it’s a little nerve-wracking. COMM: 29-year-old mechanic, Theon, recently bought a houseboat. COMM: He combined it with a tractor to build this unusual creation, an amphibious houseboat. THEON PARSEGHIAN: So, […]

Automotive Engineering Company – (for Manufacturers, Motor Sport & Motor Bike racing)

Tatnell engineering is a Northampton based engineering firm offering a wide range of services, one of our largest sectors is catering for the Automotive and motor sport industries, for both cars & motor cycles. Serving clients world wide, Tatnell are a one stop solution for automotive parts engineering, manufacturing everything from Brake discs & hubs, […]

NASA Climbing Robot Scales Cliffs and Looks for Life

[Magestic music] [vehicles drive by on gravel] [LEMUR-3 RAISING A ROBOT]>>[NARRATOR] Titus Canyon An area lying in the north of Death Valley National Park. Hundreds of millions of years ago this dark landscape lay beneath warm tropical seas. Today it is the site for a field test conducted by NASA’s Jet Propulsion Laboratory.>>[Male] Three, two, […]

Automotive Engineering Company – (for Manufacturers, Motor Sport & Motor Bike racing)

Tatnell engineering is a Northampton based engineering firm offering a wide range of services, one of our largest sectors is catering for the Automotive and motor sport industries, for both cars & motor cycles. Serving clients world wide, Tatnell are a one stop solution for automotive parts engineering, manufacturing everything from Brake discs & hubs, […]

The University of Nottingham Electric Super Bike

At The University of Nottingham we have built one of the most extreme electric superbikes on Earth. To give you an idea, it contains the equivalent of over 2,000 mobile phone batteries, which would keep your phone going for over five years. If you were to ride it sensibly and stick to the speed limits, […]

How to Win a Bike Race: Using Gears

Gears are everywhere, in cars, elevators, even bikes. None of these objects would work as well as they do without the use of gears. But how can we understand what gears do? We’re going to take a close look at gear and try and understand a little more the physics and engineering that makes them […]

We Develop a Bike Frame / E9 // Tubing

Today I want to talk about tubes for our project bike. Sourcing tubes in Germany on a low scale is very difficult. They are no butted or hydroformed tubes available. That´s why we have to work with standard tubes which look like that. One wall thickness throughout the whole tube. At the ends you need […]

The Theory of Oval Chain Rings | ROTOR Factory Tour

(whooshing) – We’re here at the Rotor HQ and factory in Madrid to find out how Q Rings are made, the science behind them, and then to go for a ride on them. And I’m really excited, some of my best results were in Q Rings and it’s been a while since I last used […]