Riding Insane & Beautiful North Shore MTB features

Riding Insane & Beautiful North Shore MTB features


Last year I visited the Pacific Northwest
for the first time, and got to see “North Shore” features in their natural habitat. The definition of what a “North Shore”
feature is can vary, but usually the term is used to describe a ladder bridge, drop,
berm, teeter totter, or other obstacle, made from wood. Often times, these materials are sourced from
the same location as the trail. It’s for this reason that true North Shore
features take on a likeness to the forest they were built from. Today we’re going to see some examples. This trail is actually in Whistler, about
an hour and a half north of the actual North Shore of Vancouver. It has a relatively flat elevation map, so
many of the features were built to span swampy sections. Still, its clear that some things were built
just for their own sake. These teeter totters are arranged so that
they connect to one another as they fall. This one contains a tight squeeze that likely
predates 800mm handlebars. And unicorn mounted 360 cameras. Other features test your balance with skinny
lines, featuring sharp turns and pesky trees that just barely clear your bars. But these trees weren’t intended to be part
of the feature—they just fell here, and I give props to anyone who can get around
them on this log ride. But I wasn’t going to hang around trying. Because this wood is native to the area and
naturally resistant to decay, it can last many years without being treated with chemicals
or paint. It looks at home in the forest, and the rough
finish does a better job of gripping your tires. Perhaps best of all, it will eventually decay
into the forest floor, attracting all the same bugs and fungi as the other deadwood
around it. During my time in Whistler, I drove down to
Vancouver for a day to ride with YouTuber Jordan Boostmaster, Artist Kristina Wayte,
and aspiring racer and builder, Aidan Borthwick. Jordan and Aiden had ridden most of these
trails before, so following them was quite the challenge. While rock features are pretty common on most
mountain bike trails, they’re particularly widespread in BC. Whether or not BC has more rock than other
places is debatable. What’s certain is that the builders there
use it to their advantage as much as possible. What some people don’t know is that rock
work is a prominent characteristic of North Shore trails, with pathways and even berms
made entirely of individual rocks. This helps armor the trail against wear, and
keep everything from falling apart during the wet season. But sometimes, rocks are just the coolest
thing to build something out of. But perhaps the most iconic, emulated North
Shore feature in existence, is the skinny ladder bridge. On that day, we encountered many of them. I would have needed quite a few more tries
to clean this bridge. Even the straight line doesn’t let you off
easy. Some of these bridges are really long, as
they’re often built from these really tall trees. I suspect that builders will either conform
the trail to a tree that has already fallen, or purposely fell a dead tree in the direction
that suits the trail. One thing is for sure; nobody is hauling these
trees into the woods. I’d love to hear some insight from builders,
as this stuff is absolutely massive. In fact, this might be the most epic north
shore bridge I’ve ever seen, with sections of ladder, plank, and log spanning a swampy
gap in the mountain side. Speaking of log rides, these features look
more like canoe rides. But at the end of the day, my favorite features
combine a little bit of everything. Kristina’s artwork is very much inspired
by these trails, with the moss, techy goodness, and of course features that send you flying
through the air. Understandably, most artists get things like
frame geometry, body position, and the actual trail totally wrong when they try to make
mountain bike art, but Kristina nails all the important details. Like the fact that Jordan was the only one
with a dual crown fork that day. Another thing she gets right is the loam,
which bc is known for. Loam is awesome on steep, freshly cut trails,
but not so much when your front wheel digs into a big pile of it. Aiden got his shoulder pretty good, but seemed
to be okay. We decided to wrap things up around that time. British Columbia is quickly becoming my favorite
place to ride, at least in the summertime. They have amazing terrain, but more importantly
a community that actually builds technically challenging trails. BC, I’ll see you again this august. Thanks for riding with me today and I’ll
see you next time.