mx2 mx6 how it works / bike transformer ebike


let’s fold the MX2 or MX6 and see how easy it is … Step 1 – press the thin tube into the tube that supports the seat and let it down. Step 2 – Pull up the handle that is in the middle of the bike frame Step 3 – shrink the handlebar of the bicycle, first open the securing tab, push the handlebar down, then close the securing tab after it has been shrunk. Step 4 – Pull the locking pins from each handlebar arm and fold them. easy ! very easy … Step 5 – Pick up the seat. Open the securing tab on the seat tube, push the seat down and close the securing tab Step 6 – Fold the pedals Press the spring tab on the inside of the pedal to release it. Now you can pick up the MX2 or MX6 and take it wherever you want. go and take it with you to the restaurant, hotel room, shopping, elevator, public transport, car, etc. , there are no limits … let’s stretch it and see that it’s even easier and faster. Step 1 – pull the seat up until you hear a “click” and then stretch the ebike. Very easy, almost half the process is already done. Step 2 – Lift the 2 tabs that are on the bike handlebar (1 at a time). and individually lifts each handlebar arm of the bicycle and individually lifts each handlebar arm of the bicycle raise the handlebar of the bicycle and adjust to the height that you intend Finally tighten the securing tab. Step 3 – Open the securing tab on the tube under the seat Pull the seat to the height that is right for you and then close the securing tab again step 4 and last, is to unfold the pedals until you hear a “click” and it is done Now let’s turn on the battery, press this button so the light stays on then check the status of the battery, press this button and the graph of the state of charge of the battery as you can see this battery is fully charged Now let’s turn on the LCD display of the ebike press and hold the center button with symbol “C” until the LCD turns on the S + and S- buttons are to regulate the pedaling motor assist (we advise not to use it, press S- until all bars disappear) turns out to be useful only for experienced users, but not for beginners as it can speed up when we do not want to. To switch on the headlight of the bicycle, press the “S +” button without releasing until the headlamp symbol is displayed on the LCD. Make sure the light turns on Our ebike has USB charging input that can charge any USB device, such as your smartphone, tablet, MP3, etc. Now let’s accelerate 🙂 Check that the throttle is in the right handlebar grip on the inside of the handle. now let’s speed up and check the speed on the LCD display… And that’s it … Have a fantastic ride Rental: [email protected] / Sales: [email protected]