k8+ foldable electric bike scooter How it works and how to use it RIDELOVER


How to unfold the ebike Ridelover K8+ ? Then pull the handle you have in the middle of the frame and straighten the ebike pull the hose connecting the handlebar arm and the handlebar stretches Easy, was not it? Now let’s get the seat up just lift the tab behind the seat and pull the seat up. Already unfolded … take the K8 + from the rest position You should not only press the rest safety catch The correct way to do this is … place the foot behind the stand so that it not slides back and pull the k8 + back so that the rest bracket collects and rises now let’s fold the K8 + again To put in rest position, simply press the arm rest down and lift the K8 + To lower the seat, raise the safety catch on the back of the seat and push the seat forward. To lower the handlebar arms, pull the hose connecting the handlebars to the arms and lower them Now pull through the handle that is in the middle of the k8 + frame, get up and it’s already folded … Now take it where you want, it looks like a trolley. How to connect to K8 +? Pressing the button is under the frame. If you press the “I” position, you will use the power from the first battery on the front of the K8 + If you press the “I” position, you will use the power from the first battery on the front of the K8 + If you press “II”, you will use the power of the second battery behind the button press the button, position “I” to give power to K8 + To turn the K8 + fully on, we have to use the remote control. Press the lightning button two times in a row, the first one is fast and the second is left pressed until the K8 + switches on. This is the LCD of the K8 + The green button is the horn. If you press the yellow button in the left direction, turn on the left direction light If you press the yellow button in the right direction, turn on the right direction light If you press the yellow button in the left direction, turn on the left direction light To turn on the front light, simply slide the red button up. The accelerator has 3 positions, STD (normal start), SPORT (accelerates a little faster) and WALK (to walk only 5km and walk with K8 +) To change between the accelerate positions, press the green button on the right handlebar arm Now accelerate on the right handlebars and watch the K8 + accelerate The K8 + has 2 disc brakes, the 2 arranged in the rear, because the rear wheel will support 80% to 90% of the total weight of your body and is where the traction is.
Security=K8 + 🙂 Now … Let’s go …