The BMW Rear Bike Carrier Pro 2.0 can easily be mounted on your BMW with tow hitch or rear carrier preparation. Mounting the rear bike carrier is very simple, no special tools are required. Unfold the bike carrier. Unlock the clamping lever and swing it upwards to a vertical position. Lift the bicycle carrier and push the support for the bicycle carrier horizontally over the ball head. Align the bicycle carrier parallel with the bumper. Swing the clamping lever downwards until the lever engages, lock the lever and remove the key. Take the plug out of the holder and push the plug into the socket. Lock it by turning it quarter of a turn clockwise. Please check the function of all the lights on the bicycle carrier before the journey. By pressing the locking mechanism on the back of the lights, you can adjust the lights horizontally to the legally mandatory distance to the outer edges of the load. Tie up the connecting cable if necessary. Depending on the requirements in different markets, a third license plate must be visible. Continue watching our How-To Series to get the most out of your BMW.