Bee (2010-2013) Instructional

Bee (2010-2013) Instructional


Welcome to the instructional video for the
Burley Bee. The Bee is a bike only trailer, that is not
designed for use with strolling, jogging, and ski kits.
Out of the box the bee arrives in its folded position.
First remove the contents, and attach the wheels.
They will lock in and out of place using the push button in the middle.
Lock the aluminum frame into place, by reaching in through the back, grabbing the lower frame
bar, and pulling it towards you. Seat the upper frame bar on top of the plastic
bumpers, and then lock the frame into place using the aluminum latches as shown.
Next install the wheel-guards. Press the provided bolts through the inside of the frame and
secure it with the nut on the outside. Be sure to tighten these bolts securely with
a small wrench. Install the tow-bar by pressing it through
the aluminum receivers, aligning the holes at the back of the receiver, and locking the
tow-bar into place with the safety pin. The windscreen can be rolled and secured at
the top. To load children open the cover completely.
The Bee can be folded for storage in less than a minute.
First remove the wheels and tow-bar, and place them inside the trailer.
Then unlock the frame latches and release the frame.